Description
Specs
| Catalog Number | HBAO3661T |
|---|---|
| Enclosure | TEAO |
| Frame | 182T |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA CURUSEEV NEMA_PREMIUM WEEE |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 8.400 A @ 208.0 V 8.000 A @ 230.0 V 4.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 89.5 % |
| Electrically Isolated Bearing | Electrically Isolated Bearings |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.0 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | H |
| Inverter Code | Inverter Ready |
| KVA Code | K |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 2700 rpm |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 16 AWG |
| Motor Type | 0628M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 13.89 IN |
| Power Factor | 79 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 3.77 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 30° C |
| Temp. Rise @ S.F. Load | 36° C |
| Start Configuration | DOL |
| Break-Down Torque | 31 LB-FT |
| Pull-Up Torque | 16.5 LB-FT |
| Locked-Rotor Torque | 22 LB-FT |
| Starting Current | 32 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 8.0 | 42.0 | 62.0 | 73.0 | 80.0 | 83.0 | 84.0 | 82.0 | ||
| Efficiency | 0.0 | 79.7 | 86.5 | 88.5 | 88.6 | 87.9 | 86.8 | 88.2 | ||
| Speed (RPM) | 1,799 | 1,786 | 1,777 | 1,767 | 1,755 | 1,744 | 1,731 | 1,748 | ||
| Line Amps | 1.94 | 2.17 | 2.65 | 3.26 | 3.99 | 4.83 | 5.77 | 4.49 |
Parts
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X .75 |
|---|---|
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
