Description
Specs
Catalog Number | GDL3770T |
---|---|
Enclosure | TEFC |
Frame | 215TZ |
Frame Material | Iron |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Cap Run |
Output @ Frequency | 7.500 HP @ 60 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 230.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | UR CSA |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 29.600 A @ 230.0 V |
Design Code | L |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 85.5 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 29.6 a |
Front Face Code | Standard |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Not Inverter |
IP Rating | NONE |
KVA Code | G |
Lifting Lugs | Standard Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Cap Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 2 @ 10 AWG, A PH |
Motor Type | 0743LC |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 19.45 IN |
Power Factor | 96 |
Product Family | General Purpose |
Pulley End Bearing Type | Ball |
Pulley Face Code | Standard |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
Service Factor | 1.15 |
Shaft Diameter | 1.375 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | Shaft Slinger |
Speed | 1750 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | Normally Closed Thermostat |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | GDL3770T |
---|---|
SPEC. | 07N243R851G1 |
HP | 7.5 |
VOLTS | 230 |
AMP | 29.6 |
RPM | 1750 |
FRAME | 215TZ |
SER.F. | 1.15 |
NEMA-NOM-EFF | 85.5 |
RATING | 40C AMB-CONT |
DE | 6307 |
ENCL | TEFC |
Performance
Full Load Torque | 0 LB-FT |
---|---|
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 0.25082 Ohms A Ph / 0.73066 Ohms B Ph |
Temp. Rise @ Rated Load | 72° C |
Temp. Rise @ S.F. Load | 89° C |
Start Configuration | DOL |
Break-Down Torque | 63 LB-FT |
Pull-Up Torque | 43.4 LB-FT |
Locked-Rotor Torque | 57.6 LB-FT |
Starting Current | 205 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 46.0 | 86.0 | 93.0 | 95.0 | 96.0 | 96.0 | 95.0 | 96.0 | ||
Efficiency | 0.0 | 70.5 | 82.3 | 85.7 | 85.9 | 84.4 | 81.4 | 85.0 | ||
Speed (RPM) | 1,794 | 1,789 | 1,778 | 1,767 | 1,754 | 1,739 | 1,719 | 1,745 | ||
Line Amps | 6.50 | 10.10 | 16.00 | 22.40 | 29.60 | 37.70 | 47.40 | 34.50 |
Parts
OC3040F18SP | 7YL OIL CAP 40MFD/370V |
---|---|
RE5029 | MARS 91423 DOUBLE POLE 230-240V CONTACTO |
EC1189C06SP | ELEC CAP, 189-227 MFD, 250V, 2.06D X 4. |
51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |