Description
Specs
| Catalog Number | GDL1615T |
|---|---|
| Enclosure | OPSB |
| Frame | 256TZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 16.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 62.000 A @ 230.0 V 71.000 A @ 208.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 86.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 62.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | E |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 6 AWG, A PH |
| Motor Type | 3956LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 24.19 IN |
| Power Factor | 96 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | Included |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 1.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | GDL1615T |
|---|---|
| SPEC. | 39T017X522 |
| HP | 16 |
| VOLTS | 208-230 |
| AMP | 71-62 |
| RPM | 1760 |
| FRAME | 256TZ |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 86.5 |
| RATING | 40C AMB-CONT |
| DE | 6309 |
| ENCL | OPSB |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 0.11 Ohms A Ph / 0.419 Ohms B Ph |
| Temp. Rise @ Rated Load | 54° C |
| Start Configuration | DOL |
| Break-Down Torque | 122 LB-FT |
| Pull-Up Torque | 64.6 LB-FT |
| Locked-Rotor Torque | 82.1 LB-FT |
| Starting Current | 331 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 42.0 | 91.0 | 96.0 | 96.0 | 96.0 | 95.0 | 93.0 | 0.0 | ||
| Efficiency | 0.0 | 82.9 | 78.7 | 89.1 | 87.3 | 84.2 | 78.8 | 0.0 | ||
| Speed (RPM) | 1,799 | 1,785 | 1,771 | 1,753 | 1,734 | 1,710 | 1,672 | 0 | ||
| Line Amps | 7.42 | 17.50 | 34.60 | 45.60 | 62.40 | 81.40 | 107.00 | 0.00 |
Parts
| OC3050F09SP | CAPACITOR 50 MFD 370 VAC |
|---|---|
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
