Description
Specs
Catalog Number | GDL1605T |
---|---|
Enclosure | ODTF |
Frame | 184TZ |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Cap Run |
Output @ Frequency | 5.000 HP @ 60 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 230.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | UR CSA |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 22.500 A @ 230.0 V |
Design Code | L |
Drip Cover | Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 80.0 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 22.5 a |
Front Face Code | Drip Cover Mounting |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Not Inverter |
KVA Code | J |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 2 @ 10 AWG, A PH |
Motor Type | 3646LC |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 16.87 IN |
Power Factor | 76 |
Product Family | General Purpose |
Product Type | FARM DUTY |
Pulley End Bearing Type | Ball |
Pulley Face Code | C-Face |
Pulley Shaft Indicator | Standard |
Rodent Screen | Included |
Service Factor | 1.00 |
Shaft Diameter | 1.125 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 1725 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | Normally Closed Thermostat |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | GDL1605T |
---|---|
SPEC. | 36M937W417G1 |
HP | 5 |
VOLTS | 230 |
AMP | 22.5 |
RPM | 1725 |
FRAME | 184TZ |
SER.F. | 1.00 |
NEMA-NOM-EFF | 80 |
RATING | 40C AMB-CONT |
DE | 6206 |
ENCL | ODTF |
Performance
Full Load Torque | 0 LB-FT |
---|---|
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 0.349 Ohms A Ph / 2.38 Ohms B Ph |
Temp. Rise @ Rated Load | 104° C |
Start Configuration | DOL |
Break-Down Torque | 45 LB-FT |
Pull-Up Torque | 39 LB-FT |
Locked-Rotor Torque | 45 LB-FT |
Starting Current | 174 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 26.0 | 60.0 | 77.0 | 85.0 | 88.0 | 90.0 | 90.0 | 0.0 | ||
Efficiency | 0.0 | 65.3 | 77.8 | 81.7 | 82.5 | 81.5 | 79.3 | 0.0 | ||
Speed (RPM) | 1,798 | 1,785 | 1,771 | 1,756 | 1,739 | 1,719 | 1,694 | 0 | ||
Line Amps | 8.50 | 10.30 | 13.50 | 17.50 | 22.20 | 27.70 | 34.00 | 0.00 |
Parts
36FN3000A01SP | EXFN, PLASTIC, 7.00 OD, .912 ID |
---|---|
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |