Description
Specs
| Catalog Number | FPM2546T-5 |
|---|---|
| Enclosure | ODP |
| Frame | 326TS |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 60.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| Agency Approvals | CULUS CSA EEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 54.000 A @ 575.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 93.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 54.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 8 AWG |
| Motor Type | 4062M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 25.69 IN |
| Power Factor | 89 |
| Product Family | Fire Pump Motor |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3520 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Wye Start - Delta Run |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FPM2546T-5 |
|---|---|
| SPEC. | 40H007X358H2 |
| HZ | 60 |
| VOLTS | 575 |
| AMPS | 54 |
| EFF | 93 |
| RATING | 40C AMB-CONT |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.178 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 47° C |
| Temp. Rise @ S.F. Load | 59° C |
| Start Configuration | DOL |
| Break-Down Torque | 202 LB-FT |
| Pull-Up Torque | 113 LB-FT |
| Locked-Rotor Torque | 147 LB-FT |
| Starting Current | 338 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 6.0 | 67.0 | 84.0 | 88.0 | 90.0 | 90.0 | 89.0 | 90.0 | ||
| Efficiency | 0.0 | 92.2 | 94.0 | 94.0 | 93.1 | 92.3 | 90.4 | 92.6 | ||
| Speed (RPM) | 3,599 | 3,582 | 3,565 | 3,545 | 3,523 | 3,500 | 3,471 | 3,509 | ||
| Line Amps | 13.10 | 18.70 | 28.60 | 40.50 | 53.90 | 68.00 | 83.30 | 62.40 |
Parts
| 10CB3500SP | CONDUIT BOX LID, CAST |
|---|---|
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
