Description
Specs
Frequency | 50.00 Hz 60.00 Hz |
---|---|
Motor Letter Type | Three Phase |
Output @ Frequency | 50.000 HP @ 60 HZ 40.000 HP @ 50 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 190.0 V @ 50 HZ 230.0 V @ 60 HZ 460.0 V @ 60 HZ 380.0 V @ 50 HZ |
Agency Approvals | CULUS CSA EEV CSA |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 60.000 A @ 460.0 V 58.000 A @ 380.0 V 120.000 A @ 230.0 V 116.000 A @ 190.0 V |
Design Code | B |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 93.0 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 58.0 a |
Front Face Code | Standard |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Not Inverter |
KVA Code | F |
Lifting Lugs | Standard Lifting Lugs |
Locked Bearing Indicator | No Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 12 @ 8 AWG |
Motor Type | 4064M |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 25.69 IN |
Power Factor | 83 |
Product Family | Fire Pump Motor |
Pulley End Bearing Type | Ball |
Pulley Face Code | Standard |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
Service Factor | 1.15 |
Shaft Diameter | 1.875 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 1470 rpm 1770 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Wye Start - Delta Run |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
SPEC. | 40H007X317H2 |
---|---|
HZ | 60 |
VOLTS | 230/460 |
AMPS | 120/60 |
EFF | 93 |
RATING | 40C AMB-CONT |
Performance
Temp. Rise @ Rated Load | 53° C |
---|---|
Temp. Rise @ S.F. Load | 67° C |
Start Configuration | DOL |
Break-Down Torque | 363 LB-FT |
Pull-Up Torque | 194 LB-FT |
Locked-Rotor Torque | 241 LB-FT |
Starting Current | 325 A |
Full Load Torque | 0 LB-FT |
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 0.155 Ohms A Ph / 0 Ohms B Ph |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 5.0 | 49.0 | 71.0 | 80.0 | 84.0 | 85.0 | 85.0 | 85.0 | |||||||||||
Efficiency | 0.0 | 89.6 | 93.2 | 93.5 | 92.7 | 91.9 | 90.6 | 92.2 | |||||||||||
Speed (RPM) | 1,499 | 1,494 | 1,487 | 1,479 | 1,471 | 1,463 | 1,452 | 1,466 | |||||||||||
Line Amps | 22.00 | 25.70 | 34.70 | 45.60 | 58.30 | 72.60 | 88.30 | 66.90 |
Parts
10CB3500SP | CONDUIT BOX LID, CAST |
---|---|
51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |