Description
Specs
| Catalog Number | FPM2514T |
|---|---|
| Enclosure | OPSB |
| Frame | 254T |
| Frame Material | Steel |
| Frequency | 50.00 Hz 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 15.000 HP @ 50 HZ 20.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 380.0 V @ 50 HZ 230.0 V @ 60 HZ 190.0 V @ 50 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA EEV CSA CULUS |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 46.000 A @ 230.0 V 42.000 A @ 190.0 V 23.000 A @ 460.0 V 21.000 A @ 380.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 90.2 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 21.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 12 @ 12 AWG |
| Motor Type | 3742M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 22.25 IN |
| Power Factor | 90 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 1.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 2860 rpm 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Wye Start - Delta Run |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FPM2514T |
|---|---|
| SPEC. | 37N756R893H2 |
| HZ | 60 |
| VOLTS | 230/460 |
| AMPS | 46/23 |
| EFF | 90.2 |
| RATING | 40C AMB-CONT |
Performance
| Break-Down Torque | 86.8 LB-FT |
|---|---|
| Pull-Up Torque | 43.4 LB-FT |
| Locked-Rotor Torque | 53.1 LB-FT |
| Starting Current | 138 A |
| Full Load Torque | 0 LB-FT |
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.53993 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 60° C |
| Temp. Rise @ S.F. Load | 79° C |
| Start Configuration | DOL |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 5.0 | 63.0 | 82.0 | 88.0 | 90.0 | 91.0 | 90.0 | 91.0 | |||||||||||
| Efficiency | 0.0 | 91.7 | 92.8 | 91.8 | 90.1 | 88.0 | 85.5 | 88.8 | |||||||||||
| Speed (RPM) | 2,999 | 2,969 | 2,939 | 2,904 | 2,866 | 2,823 | 2,776 | 2,840 | |||||||||||
| Line Amps | 5.84 | 7.67 | 11.40 | 16.00 | 20.90 | 26.70 | 32.90 | 24.40 |
Parts
| 09CB3002SP | CB W/1.38 LEAD HOLE FOR 37, 39, 307 & 30 |
|---|---|
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
