Description
Specs
| Catalog Number | FDL3731M |
|---|---|
| Enclosure | TEFC |
| Frame | 215 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 5.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 20.500 A @ 230.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 84.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 20.5 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Cap Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 12 AWG, A PH |
| Motor Type | 3730LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 18.65 IN |
| Power Factor | 93 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1740 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Do Not Use |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | KO |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FDL3731M |
|---|---|
| SPEC. | 37N373T880G1 |
| HP | 5 |
| VOLTS | 230 |
| AMP | 20.5 |
| RPM | 1740 |
| FRAME | 215 |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 84 |
| RATING | 40C AMB-CONT |
| DE | 6307 |
| ENCL | TEFC |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 0.308 Ohms A Ph / 0.966 Ohms B Ph |
| Temp. Rise @ Rated Load | 65° C |
| Start Configuration | DOL |
| Break-Down Torque | 50 LB-FT |
| Pull-Up Torque | 38 LB-FT |
| Locked-Rotor Torque | 62 LB-FT |
| Starting Current | 157 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 30.0 | 67.0 | 84.0 | 89.0 | 92.0 | 94.0 | 94.0 | 0.0 | ||
| Efficiency | 0.0 | 67.8 | 81.2 | 84.8 | 84.9 | 83.9 | 82.0 | 0.0 | ||
| Speed (RPM) | 1,799 | 1,786 | 1,773 | 1,757 | 1,740 | 1,722 | 1,700 | 0 | ||
| Line Amps | 7.48 | 8.77 | 12.00 | 15.90 | 20.70 | 25.80 | 31.40 | 0.00 |
Parts
| TPLED1027SP | THERMAL 1PH 1.5 MAN REF LED989 TDR #5817 |
|---|---|
| EC1189C06SP | ELEC CAP, 189-227 MFD, 250V, 2.06D X 4. |
| 37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
