Description
Specs
| Catalog Number | FDL3619TM |
|---|---|
| Enclosure | TEFC |
| Frame | 184T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 13.200 A @ 230.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 81.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 13.2 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 14 AWG, A PH |
| Motor Type | 3634LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 16.49 IN |
| Power Factor | 90 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | KO |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FDL3619TM |
|---|---|
| SPEC. | 36Q165W835G1 |
| HP | 3 |
| VOLTS | 230 |
| AMP | 13.2 |
| RPM | 1725 |
| FRAME | 184T |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 81.5 |
| RATING | 40C AMB-CONT |
| DE | 6206 |
| ENCL | TEFC |
Performance
| Line-Line Res. @ 25° C | 0.698 Ohms A Ph / 1.342 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 84° C |
| Start Configuration | DOL |
| Break-Down Torque | 22 LB-FT |
| Pull-Up Torque | 21.7 LB-FT |
| Locked-Rotor Torque | 26 LB-FT |
| Starting Current | 100 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 28.0 | 66.0 | 82.0 | 84.0 | 89.0 | 90.0 | 92.0 | 0.0 | ||
| Efficiency | 0.0 | 61.5 | 75.0 | 76.2 | 79.7 | 80.3 | 77.4 | 0.0 | ||
| Speed (RPM) | 1,798 | 1,790 | 1,783 | 1,774 | 1,764 | 1,754 | 1,739 | 0 | ||
| Line Amps | 6.20 | 7.80 | 8.10 | 11.60 | 13.90 | 16.80 | 20.50 | 0.00 |
Parts
| GASKET, CONDUIT BOX STD., .06 THICK LEXI | |
| RM1014A01SP | BUTYL RUB.THRM COV. (MENA) |
| HW4600B36SP | V-RING SLINGER 1.188 X 1.690 X .24 VITON |
| HA1005A03SP | SLINGER, OD 1.750, ID .938, 205 BRG |
| 36FN3000A01SP | EXFN, PLASTIC, 7.00 OD, .912 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
