Description
Specs
| Catalog Number | FDL3611TM |
|---|---|
| Enclosure | TEFC |
| Frame | 182T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 14.000 A @ 230.0 V 28.000 A @ 115.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 75.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 14.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 4 @ 14 AWG, A&J |
| Motor Type | 3634L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 15.67 IN |
| Power Factor | 67 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | KO |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FDL3611TM |
|---|---|
| SPEC. | 36Q168-3444G1 |
| HP | 2 |
| VOLTS | 115/230 |
| AMP | 28/14 |
| RPM | 1725 |
| FRAME | 182T |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 75 |
| RATING | 40C AMB-CONT |
| DE | 6206 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.732 Ohms A Ph / 0.396 Ohms B Ph |
| Temp. Rise @ Rated Load | 86° C |
| Start Configuration | DOL |
| Break-Down Torque | 23 LB-FT |
| Pull-Up Torque | 22 LB-FT |
| Locked-Rotor Torque | 27 LB-FT |
| Starting Current | 105 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 23.0 | 43.0 | 57.0 | 68.0 | 76.0 | 81.0 | 84.0 | 0.0 | ||
| Efficiency | 0.0 | 47.0 | 62.0 | 68.0 | 71.0 | 71.5 | 71.0 | 0.0 | ||
| Speed (RPM) | 1,798 | 1,786 | 1,776 | 1,765 | 1,754 | 1,740 | 1,725 | 0 | ||
| Line Amps | 8.50 | 8.80 | 9.70 | 10.80 | 12.30 | 14.20 | 16.40 | 0.00 |
Parts
| TPCRT31CASP | THERMAL 1PH 1.00 MAN 105C X |
|---|---|
| EC1850A06SP | ELEC CAP 115V 2.0 X 4.3 X |
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
| RM1014A01SP | BUTYL RUB.THRM COV. (MENA) |
| 36CB3800SP | CAPACITOR COVER, CAST |
| HW4600B36SP | V-RING SLINGER 1.188 X 1.690 X .24 VITON |
| HA1005A03SP | SLINGER, OD 1.750, ID .938, 205 BRG |
| 36FN3000A01SP | EXFN, PLASTIC, 7.00 OD, .912 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
