Description
Specs
| Catalog Number | FDEM4114T-5 |
|---|---|
| Enclosure | TEFC |
| Frame | 326TS |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 50.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | NEMA_PREMIUM UR NEMA PREMIUM CSA EEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 45.000 A @ 575.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 93.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 45.0 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 8 AWG |
| Motor Type | 1252M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 28.78 IN |
| Power Factor | 90 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.875 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3540 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FDEM4114T-5 |
|---|---|
| SPEC. | 12H685Y889G1 |
| HP | 50 |
| VOLTS | 575 |
| AMP | 45 |
| RPM | 3540 |
| FRAME | 326TS |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 93 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6312 |
| ENCL | TEFC |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 0.157 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 76° C |
| Temp. Rise @ S.F. Load | 91° C |
| Start Configuration | DOL |
| Break-Down Torque | 311 LB-FT |
| Pull-Up Torque | 120 LB-FT |
| Locked-Rotor Torque | 148 LB-FT |
| Starting Current | 347 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 63.0 | 80.0 | 87.0 | 90.0 | 91.0 | 90.0 | 91.0 | ||
| Efficiency | 0.0 | 88.4 | 92.8 | 93.5 | 93.3 | 92.8 | 91.9 | 93.0 | ||
| Speed (RPM) | 3,598 | 3,584 | 3,573 | 3,560 | 3,546 | 3,531 | 3,515 | 3,537 | ||
| Line Amps | 13.10 | 17.20 | 25.30 | 34.80 | 45.00 | 55.80 | 67.70 | 51.50 |
