Description
Specs
| Catalog Number | FDEM3610T |
|---|---|
| Enclosure | TEFC |
| Frame | 182T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | NEMA_PREMIUM UR NEMA PREMIUM CSA EEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 7.000 A @ 230.0 V 7.700 A @ 208.0 V 3.500 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 87.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.5 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3540M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 16.53 IN |
| Power Factor | 92 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FDEM3610T |
|---|---|
| SPEC. | 35E3202Q130G1 |
| HP | 3 |
| VOLTS | 230/460 |
| AMP | 7/3.5 |
| RPM | 3450 |
| FRAME | 182T |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 87.5 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6206 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 4.032 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 58° C |
| Temp. Rise @ S.F. Load | 71° C |
| Start Configuration | DOL |
| Break-Down Torque | 20.5 LB-FT |
| Pull-Up Torque | 9.62 LB-FT |
| Locked-Rotor Torque | 18.2 LB-FT |
| Starting Current | 39.19 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 12.0 | 60.0 | 81.0 | 88.0 | 92.0 | 94.0 | 93.0 | 93.0 | ||
| Efficiency | 0.0 | 82.6 | 87.7 | 88.3 | 87.6 | 86.3 | 84.4 | 86.8 | ||
| Speed (RPM) | 3,599 | 3,564 | 3,536 | 3,506 | 3,474 | 3,439 | 3,399 | 3,453 | ||
| Line Amps | 1.14 | 1.46 | 2.04 | 2.74 | 3.53 | 4.38 | 5.34 | 4.04 |
Parts
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
|---|---|
| HW4600B39SP | V-RING SLINGER 0.550 X 0.790 X .18 VITON |
| HW4600B36SP | V-RING SLINGER 1.188 X 1.690 X .24 VITON |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - PRIMED |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
