Description
Specs
| Catalog Number | FDAOL3507A |
|---|---|
| Enclosure | TEAO |
| Frame | 56H |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 4.100 A @ 230.0 V 5.400 A @ 208.0 V 8.200 A @ 115.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 74.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.1 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3428LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 12.08 IN |
| Power Factor | 80 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.20 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FDAOL3507A |
|---|---|
| SPEC. | 34M951Y166G1 |
| HP | .75 |
| VOLTS | 115/230 |
| AMP | 8.2/4.1 |
| RPM | 1725 |
| FRAME | 56H |
| SER.F. | 1.20 |
| NEMA-NOM-EFF | 74 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEAO |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.732 Ohms A Ph / 1.8 Ohms B Ph |
| Temp. Rise @ Rated Load | 62° C |
| Temp. Rise @ S.F. Load | 73° C |
| Start Configuration | DOL |
| Break-Down Torque | 5.7 LB-FT |
| Pull-Up Torque | 4.7 LB-FT |
| Locked-Rotor Torque | 7.5 LB-FT |
| Starting Current | 62 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 23.0 | 43.0 | 61.0 | 72.0 | 80.0 | 65.0 | 85.0 | 68.0 | ||
| Efficiency | 0.0 | 53.6 | 67.9 | 73.1 | 73.9 | 93.1 | 71.5 | 89.3 | ||
| Speed (RPM) | 1,798 | 1,784 | 1,770 | 1,755 | 1,739 | 1,717 | 1,694 | 1,721 | ||
| Line Amps | 5.40 | 5.40 | 6.00 | 7.00 | 8.20 | 9.80 | 11.60 | 9.48 |
Parts
| OC3020F12SP | CAPACITORS 20 MFD 370 VAC |
|---|---|
| EC1460A05SP | ELEC CAP, 460-552 MFD, 125V, 2.06D X 3. |
| HW4600B39SP | V-RING SLINGER 0.550 X 0.790 X .18 VITON |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
