Description
Specs
| Catalog Number | FDAOL3504A |
|---|---|
| Enclosure | TEAO |
| Frame | 56H |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 2.400 A @ 230.0 V 2.500 A @ 208.0 V 4.800 A @ 115.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 78.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 2.4 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 7 @ 18 AWG |
| Motor Type | 3424LC |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 12.08 IN |
| Power Factor | 89 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.20 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1745 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | FDAOL3504A |
|---|---|
| SPEC. | 34M951X444G1 |
| HP | .5 |
| VOLTS | 115/230 |
| AMP | 4.8/2.4 |
| RPM | 1745 |
| FRAME | 56H |
| SER.F. | 1.20 |
| NEMA-NOM-EFF | 78.5 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEAO |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 1.18 Ohms A Ph / 4.17 Ohms B Ph |
| Temp. Rise @ Rated Load | 37° C |
| Temp. Rise @ S.F. Load | 44° C |
| Start Configuration | DOL |
| Break-Down Torque | 3.6 LB-FT |
| Pull-Up Torque | 3.1 LB-FT |
| Locked-Rotor Torque | 4.2 LB-FT |
| Starting Current | 36.2 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 48.0 | 73.0 | 81.0 | 89.0 | 89.0 | 91.0 | 92.0 | 91.0 | ||
| Efficiency | 0.0 | 57.0 | 72.4 | 76.9 | 78.5 | 78.1 | 75.8 | 78.2 | ||
| Speed (RPM) | 1,798 | 1,786 | 1,773 | 1,758 | 1,742 | 1,722 | 1,699 | 1,726 | ||
| Line Amps | 2.00 | 2.00 | 2.80 | 3.60 | 4.60 | 5.60 | 6.80 | 5.40 |
Parts
| OC3020F12SP | CAPACITORS 20 MFD 370 VAC |
|---|---|
| EC1270A02SP | ELEC CAP, 270-324 MFD, 125V, 1.48D X 3. |
| HW4600B39SP | V-RING SLINGER 0.550 X 0.790 X .18 VITON |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
