Description
Specs
| Catalog Number | ERL1306A |
|---|---|
| Enclosure | OPEN |
| Frame | 56 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CURUSEEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Resilient |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.300 A @ 230.0 V 4.700 A @ 208.0 V 6.300 A @ 115.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 76.2 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.3 a |
| Front Face Code | Resilient Mount |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3428LC |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 12.47 IN |
| Power Factor | 95 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Resilient Mount |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | ERL1306A |
|---|---|
| SPEC. | 34G867R220G1 |
| HP | .75 |
| VOLTS | 115/230 |
| AMP | 6.3/3.3 |
| RPM | 3450 |
| FRAME | 56 |
| SER.F. | 1.25 |
| F.L. AVG. EFF. | 76.2 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | OPEN |
Performance
| Temp. Rise @ S.F. Load | 36° C |
|---|---|
| Start Configuration | DOL |
| Break-Down Torque | 3.28 LB-FT |
| Pull-Up Torque | 2.55 LB-FT |
| Locked-Rotor Torque | 3.81 LB-FT |
| Starting Current | 49.8 A |
| Full Load Torque | 0 LB-FT |
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.58846 Ohms A Ph / 2.1681 Ohms B Ph |
| Temp. Rise @ Rated Load | 27° C |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 54.0 | 80.0 | 89.0 | 93.0 | 94.0 | 95.0 | 95.0 | 95.0 | |||||||||||
| Efficiency | 0.0 | 60.3 | 73.2 | 77.3 | 78.2 | 77.3 | 74.8 | 77.3 | |||||||||||
| Speed (RPM) | 3,599 | 3,570 | 3,544 | 3,508 | 3,477 | 3,437 | 3,388 | 3,437 | |||||||||||
| Line Amps | 1.82 | 2.54 | 3.70 | 5.12 | 6.53 | 8.27 | 10.30 | 8.27 |
Parts
| CAPACITOR 30 MFD 370 VAC | |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
