Description
Specs
| Catalog Number | EMVM3611D |
|---|---|
| Enclosure | TEFC |
| Frame | D100D |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 2.200 KW @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CE CSA EEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 8.400 A @ 230.0 V 9.000 A @ 208.0 V 4.200 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 89.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.2 a |
| Frame Prefix | D |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 16 AWG |
| Motor Type | 3632M |
| Mounting Arrangement | B5 |
| Number of Poles | 4 |
| Overall Length | 17.91 IN |
| Power Factor | 75 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | D-Flange |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.103 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | IEC |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | EMVM3611D |
|---|---|
| SPEC. | 36G244S266G1 |
| IEC FRAME | D100D |
| VOLTS | 230/460 |
| AMP | 8.4/4.2 |
| RPM | 1760 |
| HZ | 60 |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 89.5 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6206 |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 39.64 LB-FT |
| Pull-Up Torque | 17.5 LB-FT |
| Locked-Rotor Torque | 24.98 LB-FT |
| Starting Current | 33.55 A |
| Full Load Torque | 0 LB-FT |
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 3.81 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 54° C |
| Temp. Rise @ S.F. Load | 66° C |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 36.0 | 56.0 | 70.0 | 76.0 | 81.0 | 83.0 | 79.0 | |||||||||||
| Efficiency | 0.0 | 81.2 | 87.4 | 88.8 | 88.5 | 87.8 | 85.7 | 88.1 | |||||||||||
| Speed (RPM) | 1,498 | 1,490 | 1,481 | 1,471 | 1,461 | 1,449 | 1,435 | 1,454 | |||||||||||
| Line Amps | 2.53 | 2.71 | 3.15 | 3.84 | 4.62 | 5.58 | 6.65 | 5.20 |
Parts
| EXFN, PLASTIC, 5.25 OD, .912 ID | |
| 36CB3000SP | CONDUIT BOX, CAST |
| 36GS1000SP | GASKET-CONDUIT BOX, .06 THICK #SV-330 LE |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
