Description
Specs
| Catalog Number | EM4110T-58 |
|---|---|
| Enclosure | TEFC |
| Frame | 324T |
| Frame Material | Iron |
| Frequency | 50.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 40.000 HP @ 50 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1500 RPM @ 50 HZ |
| Voltage @ Frequency | 400.0 V @ 50 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | IE3 UR WEEE CSA CE |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 52.000 A @ 400.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 93.6 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 52.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | F |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 8 AWG |
| Motor Type | 1272M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 30.28 IN |
| Power Factor | 86 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 2.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1470 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Wye Start - Delta Run |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT NO | EM4110T-58 |
|---|---|
| SPEC. | 12C051Y897G1 |
| HP | 40/30KW IC411 |
| VOLTS | 400 |
| AMP | 52 |
| RPM | 1470 1/MIN 318KG |
| FRAME | 324T |
| SER.F. | 1.15 |
| NOM.EFF. | 93.6 |
| PF | 86 |
| RATING | 40C AMB-CONT |
| DE BRG | 6312 |
| ENCL | TEFC |
| BLANK | IE3-94.5(75%)93.8(50%) |
Performance
| Line-Line Res. @ 25° C | 0.141 Ohms A Ph / 0 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 60° C |
| Temp. Rise @ S.F. Load | 75° C |
| Start Configuration | DOL |
| Break-Down Torque | 399 LB-FT |
| Pull-Up Torque | 177 LB-FT |
| Locked-Rotor Torque | 246 LB-FT |
| Starting Current | 295 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 4.0 | 60.0 | 80.0 | 86.0 | 88.0 | 88.0 | 87.0 | 88.0 | ||
| Efficiency | 0.0 | 92.9 | 93.8 | 94.5 | 93.8 | 93.0 | 91.8 | 93.3 | ||
| Speed (RPM) | 1,499 | 1,491 | 1,485 | 1,479 | 1,472 | 1,464 | 1,455 | 1,467 | ||
| Line Amps | 15.60 | 19.50 | 28.60 | 39.50 | 52.20 | 65.90 | 81.10 | 60.40 |
Parts
| 12FH1002SP | FAN COVER, CAST |
|---|---|
| 10CB3500SP | CONDUIT BOX LID, CAST |
| 10GS1000SP | GASKET, CONDUIT BOX LID |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
