Description
Specs
Catalog Number | EM4108T-8 |
---|---|
Enclosure | TEFC |
Frame | 286TS |
Frame Material | Iron |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 30.000 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
Voltage @ Frequency | 200.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | NEMA_PREMIUM UR NEMA PREMIUM CSA EEV |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 76.000 A @ 200.0 V |
Design Code | A |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 91.7 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 76.0 a |
Front Face Code | Standard |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Inverter Ready |
KVA Code | H |
Lifting Lugs | Standard Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 6 @ 6 AWG |
Motor Type | 0948M |
Mounting Arrangement | F1 |
Number of Poles | 2 |
Overall Length | 24.77 IN |
Power Factor | 91 |
Product Family | General Purpose |
Pulley End Bearing Type | Ball |
Pulley Face Code | Standard |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
Service Factor | 1.15 |
Shaft Diameter | 1.625 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | Shaft Slinger |
Speed | 3520 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Part Winding |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | EM4108T-8 |
---|---|
SPEC. | 09F629Z594G1 |
HP | 30 |
R.P.M. | 3520 |
VOLTS | 200 |
AMPS | 76 |
RATING | 40C AMB-CONT |
P.F. | 91 |
Performance
No-Load Current | 0 A |
---|---|
Line-Line Res. @ 25° C | 0.0511 Ohms A Ph / 0 Ohms B Ph |
Temp. Rise @ Rated Load | 80° C |
Temp. Rise @ S.F. Load | 99° C |
Start Configuration | DOL |
Break-Down Torque | 162 LB-FT |
Pull-Up Torque | 76.6 LB-FT |
Locked-Rotor Torque | 88.1 LB-FT |
Starting Current | 600 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 7.0 | 60.0 | 80.0 | 87.0 | 91.0 | 90.0 | 91.0 | 90.0 | ||
Efficiency | 0.0 | 90.0 | 93.2 | 93.0 | 92.7 | 92.0 | 90.5 | 92.3 | ||
Speed (RPM) | 3,599 | 3,582 | 3,563 | 3,542 | 3,519 | 3,496 | 3,468 | 3,505 | ||
Line Amps | 22.00 | 30.40 | 43.90 | 60.00 | 76.50 | 96.50 | 116.00 | 88.50 |
Parts
KOBX, CAST W/2.00 LEAD HOLE | |
09FH4000SP | 309 FH - BLACK PRIMER |
10CB3500SP | CONDUIT BOX LID, CAST |
10GS1000SP | GASKET, CONDUIT BOX LID |
51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |