Description
Specs
| Catalog Number | EM3702T |
|---|---|
| Enclosure | TEFC |
| Frame | 213T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 900 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 7.000 A @ 230.0 V 7.200 A @ 208.0 V 3.500 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 84.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.5 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 14 AWG |
| Motor Type | 3732M |
| Mounting Arrangement | F1 |
| Number of Poles | 8 |
| Overall Length | 17.89 IN |
| Power Factor | 62 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.375 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 865 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 37G813S277G1 |
|---|---|
| HP | 2 |
| VOLTS | 230/460 |
| AMP | 7/3.5 |
| RPM | 865 |
| FRAME | 213T |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 84 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6307 |
| ENCL | TEFC |
Performance
| Temp. Rise @ S.F. Load | 43° C |
|---|---|
| Start Configuration | DOL |
| Break-Down Torque | 29 LB-FT |
| Pull-Up Torque | 16.9 LB-FT |
| Locked-Rotor Torque | 18.2 LB-FT |
| Starting Current | 16 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 6.0 | 26.0 | 43.0 | 54.0 | 62.0 | 66.0 | 69.0 | 64.0 | ||
| Efficiency | 0.0 | 75.5 | 83.7 | 85.9 | 85.0 | 84.1 | 81.8 | 84.5 | ||
| Speed (RPM) | 899 | 892 | 884 | 876 | 866 | 854 | 838 | 859 | ||
| Line Amps | 2.17 | 2.28 | 2.57 | 2.98 | 3.51 | 4.18 | 4.94 | 3.91 |
Parts
| GASKET, CONDUIT BOX STD., .06 THICK LEXI | |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| 07FH4007SP | PRIMED |
| 36FN3000C02SP | EXFN, PLASTIC, 5.25 OD, 1.175 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
