Description
Specs
| Catalog Number | EM3558T-9 |
|---|---|
| Enclosure | TEFC |
| Frame | 145T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | NEMA_PREMIUM UR NEMA PREMIUM CSA EEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 5.800 A @ 208.0 V 5.800 A @ 230.0 V 2.900 A @ 460.0 V |
| Design Code | C |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 86.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 2.9 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3528M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 13.29 IN |
| Power Factor | 74 |
| Product Family | WP Below Decks Marine Duty |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1740 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 35E2790L098G1 |
|---|---|
| HP | 2 |
| VOLTS | 230/460 |
| AMP | 5.8/2.9 |
| RPM | 1740 |
| FRAME | 145T |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 86.5 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6205 |
| ENCL | TEFC |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 7.4117 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 60° C |
| Temp. Rise @ S.F. Load | 73° C |
| Start Configuration | DOL |
| Break-Down Torque | 24.7 LB-FT |
| Pull-Up Torque | 15.4 LB-FT |
| Locked-Rotor Torque | 19.1 LB-FT |
| Starting Current | 23.3 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 33.0 | 52.0 | 66.0 | 74.0 | 79.0 | 83.0 | 77.0 | ||
| Efficiency | 0.0 | 78.2 | 85.4 | 87.0 | 86.9 | 85.9 | 84.3 | 86.3 | ||
| Speed (RPM) | 1,799 | 1,789 | 1,774 | 1,760 | 1,745 | 1,728 | 1,708 | 1,735 | ||
| Line Amps | 1.79 | 1.87 | 2.11 | 2.47 | 2.92 | 3.46 | 4.05 | 3.24 |
Parts
| HW4600B39SP | V-RING SLINGER 0.550 X 0.790 X .18 VITON |
|---|---|
| HW4600B32SP | V-RING SLINGER 1.000 X 1.540 X .24 VITON |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
