Description
Specs
| Catalog Number | ECR9054T |
|---|---|
| Enclosure | TEFC |
| Frame | 184T |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 5.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA EEV NEMA PREMIUM NEMA_PREMIUM UR CCSA US |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 6 |
| Current @ Voltage | 7.100 A @ 460.0 V 14.200 A @ 230.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 89.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 7.1 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| KVA Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Max Speed | 2700 rpm |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 16 AWG |
| Motor Type | 0640M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 15.93 IN |
| Power Factor | 74 |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.25 |
| Shaft Diameter | 1.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1750 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 06K520Y441G1 |
|---|---|
| FRAME | 184T |
| VOLTS | 230/460 |
| FLA | 14.2/7.1 |
| RPM | 1750 |
| HZ | 60 |
| SER.F. | 1.25 |
| NEMA-NOM-EFF | 89.5 |
| RATING | 40C AMB-CONT |
| DE BRG | 6306 |
| GREASE | POLYREX EM |
| INV.TYPE | PWM |
| CT HZ FROM | 6 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 2.39 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 55° C |
| Temp. Rise @ S.F. Load | 74° C |
| Start Configuration | DOL |
| Break-Down Torque | 56.4 LB-FT |
| Pull-Up Torque | 28.6 LB-FT |
| Locked-Rotor Torque | 33.8 LB-FT |
| Starting Current | 50.2 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 5.0 | 35.0 | 54.0 | 66.0 | 74.0 | 79.0 | 81.0 | 79.0 | ||
| Efficiency | 0.0 | 84.3 | 89.9 | 91.0 | 90.5 | 89.5 | 88.0 | 89.5 | ||
| Speed (RPM) | 1,799 | 1,790 | 1,781 | 1,770 | 1,759 | 1,748 | 1,732 | 1,748 | ||
| Line Amps | 3.89 | 4.24 | 4.87 | 5.86 | 7.05 | 8.33 | 10.20 | 8.33 |
Parts
| 36FN3000C01SP | EXFN, PLASTIC, 5.25 OD, .912 ID |
|---|---|
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X .75 |
| HW4600B36SP | V-RING SLINGER 1.188 X 1.690 X .24 VITON |
| HW4600B36SP | V-RING SLINGER 1.188 X 1.690 X .24 VITON |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
