Description
Specs
| Catalog Number | ECP64110TR-4 |
|---|---|
| Enclosure | TEFC |
| Frame | 324T |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 40.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ |
| XP Class and Group | CLI GP A,B,C,D |
| XP Division | Division II |
| Agency Approvals | CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Mobilith SHC220, HC9455 |
| Blower | None |
| Constant Torque Speed Range | 1 |
| Current @ Voltage | 46.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 94.1 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Modification | 661 |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 46.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| KVA Code | F |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 2700 rpm |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Ring Terminals |
| Motor Lead Quantity/Wire Size | 3 @ 8 AWG |
| Motor Type | 1260M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 30.76 IN |
| Power Factor | 86 |
| Product Family | Chem Process S/P 32-8 IEEE 841 |
| Pulley End Bearing Type | Roller |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 2.125 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1770 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3 |
Drawings
Nameplate
| CAT.NO. | ECP64110TR-4 |
|---|---|
| SPEC. | 12G908Y762G1 |
| HP | 40 |
| RPM | 1770 |
| VOLT | 460 |
| AMP | 46 |
| RATING | 40C AMB-CONT |
| NEMA-NOM-EFF | 94.1 |
| G.MIN.EFF | 93 |
| TEMP CODE | T3 |
| TEMP = | 200 |
| CT HZ FROM | 1 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.16401 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 62° C |
| Temp. Rise @ S.F. Load | 78° C |
| Start Configuration | DOL |
| Break-Down Torque | 305 LB-FT |
| Pull-Up Torque | 146 LB-FT |
| Locked-Rotor Torque | 173 LB-FT |
| Starting Current | 290 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 5.0 | 57.0 | 77.0 | 84.0 | 86.0 | 87.0 | 86.0 | 87.0 | ||
| Efficiency | 0.0 | 92.6 | 94.7 | 94.8 | 94.1 | 93.5 | 92.5 | 93.8 | ||
| Speed (RPM) | 1,799 | 1,794 | 1,788 | 1,781 | 1,774 | 1,765 | 1,757 | 1,769 | ||
| Line Amps | 14.30 | 18.10 | 25.60 | 35.60 | 46.10 | 57.90 | 70.10 | 53.20 |
