Description
Specs
| Catalog Number | CXT3156T-5 |
|---|---|
| Enclosure | TEFC |
| Frame | 284TC |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 15.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | CLI GP A,B,C,D |
| XP Division | Division II |
| Agency Approvals | CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 3 |
| Current @ Voltage | 16.000 A @ 575.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.7 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 16.0 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 1046M |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 27.76 IN |
| Power Factor | 76 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.875 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1175 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| CAT.NO. | CXT3156T-5 |
|---|---|
| SPEC. | 10-0000-2255 |
| FRAME | 284TC |
| VOLTS | 575 |
| F.L. AMPS | 16 |
| R.P.M. | 1175 |
| HZ. | 60 |
| SER.F. | 1.15 |
| NEMA NOM. EFF. | 91.7 |
| DE | 6311 |
| MAG. CUR. | 8.2 |
| INV TYPE | PWM |
| CT | 3 |
| CC | 010A |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.868 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 42° C |
| Temp. Rise @ S.F. Load | 46° C |
| Start Configuration | DOL |
| Break-Down Torque | 214.6929 LB-FT |
| Pull-Up Torque | 68.6 LB-FT |
| Locked-Rotor Torque | 119.0448 LB-FT |
| Starting Current | 93.7279 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 4.8 | 32.7 | 53.6 | 66.7 | 74.5 | 77.4 | 78.9 | 76.0 | ||
| Efficiency | 0.0 | 84.3 | 89.9 | 91.4 | 91.7 | 91.7 | 91.6 | 91.7 | ||
| Speed (RPM) | 1,200 | 1,196 | 1,193 | 1,189 | 1,185 | 1,183 | 1,181 | 1,184 | ||
| Line Amps | 9.61 | 10.19 | 11.68 | 13.84 | 16.47 | 18.21 | 19.44 | 17.50 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 10CB3000SP | KOBX, CAST W/2.00 LEAD HOLE |
| 10CB3500SP | CONDUIT BOX LID, CAST |
| 10GS1000SP | GASKET, CONDUIT BOX LID |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
