Description
Specs
| Catalog Number | CXT3074T-5 |
|---|---|
| Enclosure | TEFC |
| Frame | 213TC |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 7.500 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | CLI GP A,B,C,D |
| XP Division | Division II |
| Agency Approvals | CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 3 |
| Current @ Voltage | 7.400 A @ 575.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.7 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 7.4 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | K |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 0748M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 19.20 IN |
| Power Factor | 85 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.375 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| CAT.NO. | CXT3074T-5 |
|---|---|
| SPEC. | 07-0000-1112 |
| FRAME | 213TC |
| VOLTS | 575 |
| F.L. AMPS | 7.4 |
| R.P.M. | 1760 |
| HZ. | 60 |
| SER.F. | 1.15 |
| NEMA NOM. EFF. | 91.7 |
| DE | 6307 |
| MAG. CUR. | 3.2 |
| INV TYPE | PWM |
| CT | 3 |
| CC | 010A |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 2.03 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 25° C |
| Temp. Rise @ S.F. Load | 33° C |
| Start Configuration | DOL |
| Break-Down Torque | 79.0744 LB-FT |
| Pull-Up Torque | 32.25 LB-FT |
| Locked-Rotor Torque | 42.7086 LB-FT |
| Starting Current | 47.9434 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 5.7 | 42.3 | 65.1 | 77.0 | 82.9 | 86.1 | 87.7 | 86.0 | ||
| Efficiency | 0.0 | 85.9 | 90.7 | 91.9 | 92.0 | 91.7 | 91.1 | 91.7 | ||
| Speed (RPM) | 1,800 | 1,794 | 1,788 | 1,782 | 1,775 | 1,768 | 1,761 | 1,768 | ||
| Line Amps | 3.50 | 3.88 | 4.77 | 5.98 | 7.37 | 8.91 | 10.56 | 8.91 |
Parts
| TAG-INSTAL-MAINT no wire (2100bx)4/22 | |
| 37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
| HW4600B36SP | V-RING SLINGER 1.188 X 1.690 X .24 VITON |
| 09CB3002SP | CB W/1.38 LEAD HOLE FOR 37, 39, 307 & 30 |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 |
| 09GS1013SP | GS FOR 09CB3501, 12CB1500 & 12CB1503 LID |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
