Description
Specs
| Catalog Number | CXM21122T |
|---|---|
| Enclosure | XPFC |
| Frame | 215TC |
| Frame Material | Steel |
| Frequency | 50.00 Hz 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 10.000 HP @ 60 HZ 7.500 HP @ 50 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 380.0 V @ 50 HZ 230.0 V @ 60 HZ 190.0 V @ 50 HZ 460.0 V @ 60 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | CSA EEV UL |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 6 |
| Current @ Voltage | 22.400 A @ 230.0 V 20.800 A @ 190.0 V 11.200 A @ 460.0 V 10.400 A @ 380.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 90.2 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 10.4 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 5200 rpm |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3750M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 21.81 IN |
| Power Factor | 90 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.375 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 3510 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 37-0000-0380 |
|---|---|
| CAT.NO. | CXM21122T |
| HP | 10//7.5 |
| VOLTS | 230/460//190/380 |
| AMPS | 22.4/11.2//20.8/10.4 |
| RPM | 3510//2915 |
| HZ | 60//50 |
| SER.F. | 1.15 |
| FRAME | 215TC |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 54 LB-FT |
| Pull-Up Torque | 25.7 LB-FT |
| Locked-Rotor Torque | 29.9 LB-FT |
| Starting Current | 87.3 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 8.0 | 61.0 | 81.0 | 88.0 | 90.0 | 91.0 | 91.0 | 0.0 | ||
| Efficiency | 0.0 | 89.0 | 92.4 | 92.8 | 92.3 | 91.3 | 90.1 | 0.0 | ||
| Speed (RPM) | 3,596 | 3,579 | 3,558 | 3,535 | 3,511 | 3,483 | 3,454 | 0 | ||
| Line Amps | 3.29 | 4.33 | 6.25 | 8.60 | 11.20 | 14.10 | 17.10 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 37FH4000A02SP | FAN COVER, W/ PRIMER |
| 36FN3000C02SP | EXFN, PLASTIC, 5.25 OD, 1.175 ID |
| 35CB3001A02SP | EXPL PROOF CONDUIT BOX, 3/4"PIPE TAP LEA |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
