Description
Specs
| Catalog Number | CXM05142-57 |
|---|---|
| Enclosure | XPFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 50.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 1.000 HP @ 50 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1500 RPM @ 50 HZ |
| Voltage @ Frequency | 230.0 V @ 50 HZ 400.0 V @ 50 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | UL CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 2.000 A @ 400.0 V 3.450 A @ 230.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 74.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 2.0 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3432M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 15.22 IN |
| Power Factor | 76 |
| Product Family | Hazardous Location Motor |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1425 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 34-0000-0422 |
|---|---|
| CAT.NO. | CXM05142-57 |
| HP | 1 |
| VOLTS | 230/400 |
| AMPS | 3.45/2 |
| RPM | 1425 |
| HZ | 50 |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| FRAME | 56C |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| Line-Line Res. @ 25° C | 12.6 Ohms A Ph / 0 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 76° C |
| Start Configuration | DOL |
| Break-Down Torque | 12.5 LB-FT |
| Pull-Up Torque | 9.8 LB-FT |
| Locked-Rotor Torque | 11.5 LB-FT |
| Starting Current | 12.1 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 12.0 | 30.0 | 53.0 | 63.0 | 72.0 | 79.0 | 86.0 | 0.0 | ||
| Efficiency | 0.0 | 66.6 | 75.4 | 76.6 | 75.4 | 72.9 | 69.6 | 0.0 | ||
| Speed (RPM) | 1,497 | 1,480 | 1,462 | 1,443 | 1,422 | 1,398 | 1,370 | 0 | ||
| Line Amps | 1.20 | 1.40 | 1.40 | 1.70 | 2.00 | 2.30 | 2.60 | 0.00 |
Parts
| 34FN3002A01SP | EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ |
|---|---|
| 34EP3705A01SP | PU ENDPLATE, MACH |
| 35CB3001A01SP | EXPL CONDUIT BOX, MACH, 1/2" PIPE TAP LE |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
