Description
Specs
Catalog Number | CXL18322T |
---|---|
Enclosure | XPFC |
Frame | 184TC |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Induction Run |
Output @ Frequency | 3.000 HP @ 60 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
XP Class and Group | CLI GP D; CLII GP F,G |
XP Division | Division I |
Agency Approvals | UL CSA |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 14.500 A @ 230.0 V 29.000 A @ 115.0 V |
Design Code | L |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 76.0 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 14.5 a |
Heater Indicator | No Heater |
Insulation Class | F |
IP Rating | NONE |
KVA Code | G |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Termination | Flying Leads |
Motor Type | 3634L |
Mounting Arrangement | F1 |
Number of Poles | 2 |
Overall Length | 18.86 IN |
Power Factor | 87 |
Product Family | General Purpose |
Pulley Face Code | C-Face |
Rodent Screen | None |
RoHS Status | ROHS NON-COMPLIANT |
Service Factor | 1.15 |
Shaft Diameter | 1.125 IN |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Speed | 3450 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | Normally Closed Thermostat |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
XP Temp Code | T3C |
Drawings
Nameplate
SPEC. | 36-0000-0506 |
---|---|
CAT.NO. | CXL18322T |
HP | 3 |
VOLTS | 115/230 |
AMPS | 29/14.5 |
RPM | 3450 |
HZ | 60 |
SER.F. | 1.15 |
RATING | 40C AMB-CONT |
FRAME | 184TC |
USABLE AT 208V | N/A |
BLANK | NEMA MG-1 PART 5, IP54 |
Performance
Locked-Rotor Torque | 9.66 LB-FT |
---|---|
Starting Current | 89.9 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 27.0 | 60.0 | 75.0 | 83.0 | 88.0 | 89.0 | 90.0 | 0.0 | ||
Efficiency | 0.0 | 59.7 | 71.7 | 75.5 | 76.0 | 75.6 | 73.5 | 0.0 | ||
Speed (RPM) | 3,591 | 3,569 | 3,546 | 3,522 | 3,449 | 3,455 | 3,410 | 0 | ||
Line Amps | 5.74 | 7.18 | 9.31 | 11.80 | 14.55 | 18.30 | 21.90 | 0.00 |