Description
Specs
Catalog Number | CXL14222T |
---|---|
Enclosure | XPFC |
Frame | 143TC |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Induction Run |
Output @ Frequency | 2.000 HP @ 60 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
Voltage @ Frequency | 115.0 V @ 60 HZ 208.0 V @ 60 HZ 230.0 V @ 60 HZ |
XP Class and Group | CLI GP D; CLII GP F,G |
XP Division | Division I |
Agency Approvals | UL CSA |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 10.500 A @ 230.0 V 11.500 A @ 208.0 V 21.000 A @ 115.0 V |
Design Code | L |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 75.5 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 10.5 a |
Heater Indicator | No Heater |
Insulation Class | F |
IP Rating | NONE |
KVA Code | J |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Termination | Flying Leads |
Motor Type | 3540L |
Mounting Arrangement | F1 |
Number of Poles | 2 |
Overall Length | 17.48 IN |
Power Factor | 77 |
Product Family | General Purpose |
Pulley Face Code | C-Face |
Rodent Screen | None |
Service Factor | 1.15 |
Shaft Diameter | 0.875 IN |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Speed | 3450 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | Normally Closed Thermostat |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
XP Temp Code | T3C |
Drawings
Nameplate
SPEC. | 35-0000-1106 |
---|---|
CAT.NO. | CXL14222T |
HP | 2 |
VOLTS | 115/208-230 |
AMPS | 21/11.5-10.5 |
RPM | 3450 |
HZ | 60 |
SER.F. | 1.15 |
RATING | 40C AMB-CONT |
FRAME | 143TC |
USABLE AT 208V | N/A |
BLANK | NEMA MG-1 PART 5, IP54 |
Performance
Full Load Torque | 0 LB-FT |
---|---|
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 0.192 Ohms A Ph / 1.53 Ohms B Ph |
Temp. Rise @ Rated Load | 59° C |
Temp. Rise @ S.F. Load | 69° C |
Start Configuration | DOL |
Break-Down Torque | 8.8 LB-FT |
Pull-Up Torque | 3 LB-FT |
Locked-Rotor Torque | 6.3 LB-FT |
Starting Current | 131 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 22.0 | 46.0 | 64.0 | 75.0 | 80.0 | 83.0 | 85.0 | 82.0 | |||||||||||
Efficiency | 0.0 | 64.7 | 74.6 | 77.1 | 78.2 | 77.6 | 75.4 | 77.8 | |||||||||||
Speed (RPM) | 3,599 | 3,568 | 3,545 | 3,520 | 3,492 | 3,459 | 3,421 | 3,472 | |||||||||||
Line Amps | 9.68 | 11.18 | 13.77 | 16.94 | 20.70 | 24.86 | 29.71 | 23.20 |
Parts
TAG-INSTAL-MAINT no wire (2100bx)4/22 | |
35FH4005A01SP | IEC FH NO GREASER W/PRIMED |
34FN3002A01SP | EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ |
35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
35EP3700A01SP | FR ENDPLATE, XPFC |
35EP3702A01SP | PU EP-205 BRG-35X-56C-143-5TC |
35CB3001A02SP | EXPL PROOF CONDUIT BOX, 3/4"PIPE TAP LEA |
35CB3500A01SP | CONDUIT BOX LID, MACH |
EC1189A02SP | 61B2D120189NNBA ELEC CAP, 189-227MFD, 12 |
EC1270A02SP | ELEC CAP, 270-324 MFD, 125V, 1.48D X 3. |