Description
Specs
| Catalog Number | CXL050742A-50 |
|---|---|
| Enclosure | XPFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 50.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .750 HP @ 50 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1500 RPM @ 50 HZ |
| Voltage @ Frequency | 110.0 V @ 50 HZ 220.0 V @ 50 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | CSA UL |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 4.800 A @ 220.0 V 9.600 A @ 110.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 70.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.8 a |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3528L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 15.15 IN |
| Power Factor | 76 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1425 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 1 Location | EP |
| Winding Thermal 2 | None |
| XP Temp Code | T4 |
Drawings
Nameplate
| SPEC | 35-0000-1062 |
|---|---|
| CAT.NO. | CXL050742A-50 |
| H.P. | .75 |
| VOLTS | 110/220 |
| AMPS | 9.6/4.8 |
| R.P.M. | 1425 35WGS318 |
| HZ | 50 |
| SER.F. | 1.00 |
| RATING | 40C AMB-CONT |
| FRAME | 56C |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.825 Ohms A Ph / 2.35 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 11.2 LB-FT |
| Pull-Up Torque | 5.85 LB-FT |
| Locked-Rotor Torque | 7.35 LB-FT |
| Starting Current | 50.8 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 16.0 | 38.0 | 54.0 | 66.0 | 74.0 | 80.0 | 83.0 | 0.0 | ||
| Efficiency | 0.0 | 56.3 | 67.9 | 71.4 | 71.8 | 69.5 | 66.1 | 0.0 | ||
| Speed (RPM) | 1,498 | 1,487 | 1,477 | 1,464 | 1,453 | 1,433 | 1,411 | 0 | ||
| Line Amps | 6.00 | 6.32 | 7.01 | 8.14 | 9.47 | 11.40 | 13.60 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 35FH4005A01SP | IEC FH NO GREASER W/PRIMED |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| 35EP3700A01SP | FR ENDPLATE, XPFC |
| 35EP3702A01SP | PU EP-205 BRG-35X-56C-143-5TC |
| 35CB3001A01SP | EXPL CONDUIT BOX, MACH, 1/2" PIPE TAP LE |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
| EC1189A02SP | 61B2D120189NNBA ELEC CAP, 189-227MFD, 12 |
| EC1270A02SP | ELEC CAP, 270-324 MFD, 125V, 1.48D X 3. |
