Description
Specs
| Catalog Number | CXL050542A-50 |
|---|---|
| Enclosure | XPFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 50.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .500 HP @ 50 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1500 RPM @ 50 HZ |
| Voltage @ Frequency | 110.0 V @ 50 HZ 220.0 V @ 50 HZ |
| XP Class and Group | CLI GP D; CLII GP F,G |
| XP Division | Division I |
| Agency Approvals | CSA UL |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.600 A @ 220.0 V 7.200 A @ 110.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 62.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.6 a |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3428L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 15.22 IN |
| Power Factor | 76 |
| Product Family | Hazardous Location Motor |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1425 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | EP |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC | 34-0000-0403 |
|---|---|
| CAT.NO. | CXL050542A-50 |
| H.P. | .5 |
| VOLTS | 110/220 |
| AMPS | 7.2/3.6 |
| R.P.M. | 1425 34WGW776 |
| HZ | 50 |
| SER.F. | 1.00 |
| RATING | 40C AMB-CONT |
| FRAME | 56C |
| USABLE AT 208V | N/A |
| BLANK | NEMA MG-1 PART 5, IP54 |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 5 Ohms A Ph / 4.03 Ohms B Ph |
| Temp. Rise @ Rated Load | 68° C |
| Start Configuration | DOL |
| Break-Down Torque | 3.8 LB-FT |
| Pull-Up Torque | 3.6 LB-FT |
| Locked-Rotor Torque | 6 LB-FT |
| Starting Current | 17 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 21.0 | 41.0 | 57.0 | 69.0 | 77.0 | 82.0 | 85.0 | 0.0 | ||
| Efficiency | 0.0 | 48.0 | 62.2 | 67.5 | 68.8 | 67.6 | 64.2 | 0.0 | ||
| Speed (RPM) | 1,495 | 1,481 | 1,466 | 1,448 | 1,428 | 1,402 | 1,367 | 0 | ||
| Line Amps | 2.10 | 2.20 | 2.40 | 2.70 | 3.20 | 3.80 | 4.60 | 3.80 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 34FH4002A01SP | IEC FH NO GREASER PRIMED |
| 34FN3002A01SP | EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ |
| 34EP3705A01SP | PU ENDPLATE, MACH |
| 35CB3001A01SP | EXPL CONDUIT BOX, MACH, 1/2" PIPE TAP LE |
| 35CB3500A01SP | CONDUIT BOX LID, MACH |
| EC1130A08SP | ELEC CAP 115V 1.125X2.750 X |
