Description
Specs
| Catalog Number | CWDM3561TP-5 |
|---|---|
| Enclosure | TEFC |
| Frame | 145TC |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.200 A @ 575.0 V |
| Design Code | D |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 81.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.2 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | H |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
| Motor Type | 3540M |
| Mounting Arrangement | F3 |
| Number of Poles | 4 |
| Overall Length | 15.54 IN |
| Power Factor | 86 |
| Product Family | Wash Down |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 0.875 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1640 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CWDM3561TP-5 |
|---|---|
| SPEC. | 35E2678G099G1 |
| HP | 3 |
| VOLTS | 575 |
| AMP | 3.2 |
| RPM | 1640 |
| FRAME | 145TC |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 81 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 8.33 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 95° C |
| Start Configuration | DOL |
| Break-Down Torque | 35.15 LB-FT |
| Pull-Up Torque | 31.59 LB-FT |
| Locked-Rotor Torque | 39.29 LB-FT |
| Starting Current | 22.35 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 11.0 | 48.0 | 70.0 | 80.0 | 86.0 | 89.0 | 90.0 | 0.0 | ||
| Efficiency | 0.0 | 77.5 | 83.3 | 83.1 | 81.1 | 77.9 | 73.0 | 0.0 | ||
| Speed (RPM) | 1,799 | 1,765 | 1,728 | 1,690 | 1,645 | 1,590 | 1,519 | 0 | ||
| Line Amps | 1.37 | 1.55 | 1.99 | 2.54 | 3.22 | 4.06 | 5.12 | 0.00 |
Parts
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
|---|---|
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
