Description
Specs
| Catalog Number | CWDL3507 |
|---|---|
| Enclosure | TEFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 10.000 A @ 115.0 V 5.000 A @ 230.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 70.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 5.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3522L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 13.22 IN |
| Power Factor | 69 |
| Product Family | Wash Down |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1750 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CWDL3507 |
|---|---|
| SPEC. | 35S576G393 |
| HP | .75 |
| VOLTS | 115/230 |
| AMP | 10/5 |
| RPM | 1750 |
| FRAME | 56C |
| SER.F. | 1.25 |
| NEMA-NOM-EFF | 70 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 1.14 Ohms A Ph / 1.85 Ohms B Ph |
| Temp. Rise @ Rated Load | 91° C |
| Temp. Rise @ S.F. Load | 119° C |
| Start Configuration | DOL |
| Break-Down Torque | 4.86 LB-FT |
| Pull-Up Torque | 4 LB-FT |
| Locked-Rotor Torque | 8.91 LB-FT |
| Starting Current | 59.09 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 17.0 | 41.0 | 58.0 | 70.0 | 77.0 | 82.0 | 85.0 | 81.0 | ||
| Efficiency | 0.0 | 57.2 | 69.2 | 71.9 | 72.1 | 70.0 | 66.0 | 70.9 | ||
| Speed (RPM) | 1,796 | 1,784 | 1,770 | 1,754 | 1,737 | 1,716 | 1,687 | 1,716 | ||
| Line Amps | 4.92 | 5.24 | 6.06 | 7.22 | 8.64 | 10.38 | 12.49 | 10.30 |
Parts
| EC1540A06SP | ELEC CAP, 540-648 MFD, 125V, 2.06D X 4. |
|---|---|
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - PRIMED |
| HW4600B39SP | V-RING SLINGER 0.550 X 0.790 X .18 VITON |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
