Description
Specs
| Catalog Number | CTM1764T |
|---|---|
| Enclosure | TEFC |
| Frame | 286T |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 30.000 HP @ 60 HZ 7.500 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 36.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.7 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 13.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 6 @ 10 AWG |
| Motor Type | 1050M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 8 |
| Overall Length | 27.93 IN |
| Product Family | Chemical Processing (Not DC) |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1760 rpm 870 rpm |
| Speed Code | 2S-1W-VT |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CTM1764T |
|---|---|
| SPEC. | 10H161W469G1 |
| HP | 30/7.5 |
| VOLTS | 460 |
| AMP | 36/13 |
| RPM | 1760/870 |
| FRAME | 286T |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| DE | 6311 |
| ENCL | TEFC |
| FRONT | 6311 |
| PULLEY | 6311 |
| GREASE | POLYREX EM |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 1.31 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 45° C |
| Temp. Rise @ S.F. Load | 52° C |
| Start Configuration | DOL |
| Break-Down Torque | 89 LB-FT |
| Pull-Up Torque | 50 LB-FT |
| Locked-Rotor Torque | 68 LB-FT |
| Starting Current | 55 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 6.0 | 26.0 | 43.0 | 55.0 | 61.0 | 66.0 | 68.0 | 64.0 | |||||||||||
| Efficiency | 0.0 | 75.5 | 84.4 | 87.3 | 88.3 | 88.3 | 87.6 | 88.3 | |||||||||||
| Speed (RPM) | 899 | 897 | 894 | 892 | 889 | 885 | 881 | 887 | |||||||||||
| Line Amps | 8.50 | 8.90 | 9.80 | 11.10 | 13.00 | 15.00 | 17.70 | 14.20 |
Parts
| DRAIN PLUG, PLASTIC (MICRO PLAS) | |
| HA4001A01SP | DRAIN PLUG, PLASTIC (MICRO PLAS) |
| 09FN3001A02SP | EXTERNAL FAN, PLASTIC (COMES W/SCREW FRO |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
