Description
Specs
| Catalog Number | CSWDM3541-5 |
|---|---|
| Enclosure | TENV |
| Frame | 56C |
| Frame Material | Stainless Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | .900 A @ 575.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 80.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 0.9 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | N |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
| Motor Type | 3518M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 11.06 IN |
| Power Factor | 80 |
| Product Family | Wash Down Paint Free |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CSWDM3541-5 |
|---|---|
| SPEC. | 35S630R394G1 |
| HP | .75 |
| VOLTS | 575 |
| AMP | .9 |
| RPM | 3450 |
| FRAME | 56C |
| SER.F. | 1.25 |
| NEMA-NOM-EFF | 80 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TENV |
Performance
| Line-Line Res. @ 25° C | 24.1 Ohms A Ph / 0 Ohms B Ph |
|---|---|
| Start Configuration | DOL |
| Break-Down Torque | 7.62 LB-FT |
| Pull-Up Torque | 4.11 LB-FT |
| Locked-Rotor Torque | 5.61 LB-FT |
| Starting Current | 9.42 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 17.0 | 42.0 | 61.0 | 72.0 | 78.0 | 81.0 | 82.0 | 81.0 | ||
| Efficiency | 0.0 | 62.3 | 74.3 | 78.7 | 80.3 | 80.9 | 80.0 | 80.9 | ||
| Speed (RPM) | 3,599 | 3,571 | 3,536 | 3,510 | 3,478 | 3,445 | 3,407 | 3,445 | ||
| Line Amps | 0.49 | 0.53 | 0.61 | 0.73 | 0.88 | 1.03 | 1.22 | 1.03 |
