Description
Specs
| Catalog Number | CSWDM3539 |
|---|---|
| Enclosure | TENV |
| Frame | 56C |
| Frame Material | Stainless Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ 208.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 1.900 A @ 230.0 V 1.900 A @ 208.0 V .950 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 78.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 1.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3522M |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 12.06 IN |
| Power Factor | 60 |
| Product Family | Wash Down Paint Free |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1165 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| SPEC. | 35S630N469G1 |
|---|---|
| HP | .5 |
| VOLTS | 208-230/460 |
| AMP | 1.9/0.95 |
| RPM | 1165 |
| FRAME | 56C |
| SER.F. | 1.25 |
| NEMA-NOM-EFF | 78.5 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TENV |
Performance
| Start Configuration | DOL |
|---|---|
| Break-Down Torque | 7.69 LB-FT |
| Pull-Up Torque | 5.09 LB-FT |
| Locked-Rotor Torque | 5.89 LB-FT |
| Starting Current | 5.68 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 10.0 | 24.0 | 39.0 | 51.0 | 60.0 | 67.0 | 72.0 | 67.0 | ||
| Efficiency | 0.0 | 58.1 | 72.5 | 77.4 | 78.8 | 78.8 | 77.6 | 78.8 | ||
| Speed (RPM) | 1,199 | 1,193 | 1,184 | 1,175 | 1,165 | 1,154 | 1,142 | 1,154 | ||
| Line Amps | 0.71 | 0.73 | 0.78 | 0.86 | 0.95 | 1.08 | 1.23 | 1.08 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|
