Description
Specs
| Catalog Number | CSSWDM3542 |
|---|---|
| Enclosure | TENV |
| Frame | 56C |
| Frame Material | Stainless Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 1.080 A @ 460.0 V 2.160 A @ 230.0 V 2.360 A @ 208.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 82.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 1.1 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Finish | UNPAINTED |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3518M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 11.09 IN |
| Power Factor | 78 |
| Product Family | Wash Down All Stainless Steel |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1740 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CSSWDM3542 |
|---|---|
| SPEC. | 35V814P559 |
| HP | .75 |
| VOLTS | 208-230/460 |
| AMP | 2.36-2.16/1.08 |
| RPM | 1740 |
| FRAME | 56C |
| SER.F. | 1.25 |
| NEMA-NOM-EFF | 82.5 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TENV |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 22.2 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 78° C |
| Temp. Rise @ S.F. Load | 98° C |
| Start Configuration | DOL |
| Break-Down Torque | 10.4 LB-FT |
| Pull-Up Torque | 6.64 LB-FT |
| Locked-Rotor Torque | 7.43 LB-FT |
| Starting Current | 9.74 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 9.0 | 35.0 | 56.0 | 70.0 | 78.0 | 84.0 | 87.0 | 84.0 | ||
| Efficiency | 0.0 | 71.6 | 81.3 | 83.4 | 83.1 | 81.8 | 80.4 | 82.5 | ||
| Speed (RPM) | 1,799 | 1,787 | 1,773 | 1,758 | 1,742 | 1,727 | 1,708 | 1,728 | ||
| Line Amps | 0.65 | 0.69 | 0.78 | 0.92 | 1.09 | 1.27 | 1.50 | 1.27 |
