Description
Specs
| Catalog Number | CL3709T |
|---|---|
| Enclosure | TEFC |
| Frame | 213TC |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 7.500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 33.000 A @ 230.0 V 36.000 A @ 208.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 83.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 33.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | F |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 10 AWG, A PH |
| Motor Type | 3735LC |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 18.63 IN |
| Power Factor | 91 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 1.375 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CL3709T |
|---|---|
| SPEC. | 37-0000-0098 |
| HP | 7.5 |
| VOLTS | 208-230 |
| AMP | 36-33 |
| RPM | 3450 |
| FRAME | 213TC |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 83 |
| RATING | 40C AMB-CONT |
| DE | 6307 |
| ENCL | TEFC |
Performance
| Rated Load | 100% | 125% | 150% | S.F. | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 37.0 | 76.0 | 88.0 | 92.0 | 94.0 | 94.0 | 94.0 | 0.0 | ||
| Efficiency | 0.0 | 66.7 | 78.4 | 82.2 | 83.3 | 82.9 | 81.6 | 0.0 | ||
| Speed (RPM) | 3,595 | 3,575 | 3,555 | 3,533 | 3,508 | 3,481 | 3,449 | 0 | ||
| Line Amps | 8.20 | 12.00 | 17.60 | 24.10 | 31.20 | 39.00 | 47.60 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
| 37GS1000SP | GASKET, CONDUIT BOX STD., .06 THICK LEXI |
| 37EP3101A01SP | FRONT TEFC 206 BRG 37 L&M, W/GREASER |
| 37CB3802SP | CAPACITOR COVER, CAST |
