Description
Specs
| Catalog Number | CJL1313A |
|---|---|
| Enclosure | OPEN |
| Frame | 56J |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 1.500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 13.000 A @ 115.0 V 6.500 A @ 230.0 V |
| Design Code | - |
| Drip Cover | Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 78.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 6.5 a |
| Front Face Code | Drip Cover Mounting |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 4 @ 16 AWG, A&J |
| Motor Type | 3432LC |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 13.89 IN |
| Power Factor | 95 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Ext Thread |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.30 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Fixed Opposite Standard |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CJL1313A |
|---|---|
| SPEC. | 34F532X598 |
| HP | 1.5 |
| VOLTS | 115/230 |
| AMP | 13/6.5 |
| RPM | 3450 |
| FRAME | 56J |
| SER.F. | 1.30 |
| NEMA-NOM-EFF | 78.5 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | OPEN |
Performance
| Line-Line Res. @ 25° C | 1.58 Ohms A Ph / 1.44 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 38° C |
| Temp. Rise @ S.F. Load | 53° C |
| Start Configuration | DOL |
| Break-Down Torque | 6.2 LB-FT |
| Pull-Up Torque | 5 LB-FT |
| Locked-Rotor Torque | 6.7 LB-FT |
| Starting Current | 43.5 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 40.0 | 81.0 | 90.0 | 93.0 | 95.0 | 95.0 | 95.0 | 95.0 | ||
| Efficiency | 0.0 | 60.5 | 76.2 | 77.7 | 78.5 | 77.2 | 75.3 | 76.8 | ||
| Speed (RPM) | 3,599 | 3,566 | 3,534 | 3,498 | 3,455 | 3,403 | 3,343 | 3,391 | ||
| Line Amps | 1.65 | 2.45 | 3.65 | 5.00 | 6.50 | 8.25 | 10.25 | 8.65 |
Parts
| ELEC CAP, 540-648 MFD, 125V, 2.06D X 4. | |
| 34EP3401A01SP | PU ENDPLATE, MACH |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
