Description
Specs
| Catalog Number | CHM565A |
|---|---|
| Enclosure | TEAO |
| Frame | 56 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 1.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Resilient |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 1.800 A @ 460.0 V 3.600 A @ 230.0 V 3.700 A @ 208.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 74.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 1.8 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 12 @ 18 AWG |
| Motor Type | 3524M |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 12.41 IN |
| Power Factor | 68 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Resilient Mount |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1140 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CHM565A |
|---|---|
| SPEC. | 35X463L465G1 |
| HP | 1 |
| VOLTS | 208-230/460 |
| AMP | 3.7-3.6/1.8 |
| RPM | 1140 |
| FRAME | 56 |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 74 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEAO |
Performance
| Temp. Rise @ Rated Load | 32° C |
|---|---|
| Temp. Rise @ S.F. Load | 37° C |
| Start Configuration | DOL |
| Break-Down Torque | 15.2 LB-FT |
| Pull-Up Torque | 10.1 LB-FT |
| Locked-Rotor Torque | 12 LB-FT |
| Starting Current | 10 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 10.0 | 31.0 | 46.0 | 57.0 | 68.0 | 73.0 | 78.0 | 71.0 | ||
| Efficiency | 0.0 | 59.2 | 73.0 | 78.6 | 75.9 | 75.4 | 73.4 | 75.6 | ||
| Speed (RPM) | 1,199 | 1,187 | 1,177 | 1,166 | 1,153 | 1,138 | 1,122 | 1,144 | ||
| Line Amps | 1.23 | 1.29 | 1.40 | 1.55 | 1.78 | 2.07 | 2.35 | 1.95 |
Parts
| 35CB4500SP | TERMINAL BOX LID STAMPED |
|---|---|
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
