Description
Specs
| Catalog Number | CHC3526A |
|---|---|
| Enclosure | TEAO |
| Frame | 56Z |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Oil Capacitor Start and Run |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 900 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Resilient |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 4.600 A @ 230.0 V 9.200 A @ 115.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 50.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 4.6 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | F |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel |
| Motor Lead Termination | None |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3535C |
| Mounting Arrangement | F1 |
| Number of Poles | 8 |
| Overall Length | 14.40 IN |
| Power Factor | 68 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Resilient Mount |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible: Connected Standard |
| Shaft Slinger Indicator | No Slinger |
| Speed | 825 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CHC3526A |
|---|---|
| SPEC. | 35H317X411 |
| HP | .5 AIR OVER |
| VOLTS | 115/230 |
| AMP | 9.2/4.6 |
| RPM | 825 |
| FRAME | 56Z |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 50 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEAO |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 1.45 Ohms A Ph / 20.2 Ohms B Ph |
| Temp. Rise @ Rated Load | 84° C |
| Start Configuration | DOL |
| Break-Down Torque | 4.9 LB-FT |
| Pull-Up Torque | 1.3 LB-FT |
| Locked-Rotor Torque | 1.3 LB-FT |
| Starting Current | 22 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 29.0 | 40.0 | 53.0 | 63.0 | 69.0 | 76.0 | 69.0 | 0.0 | ||
| Efficiency | 0.0 | 31.0 | 43.0 | 49.1 | 50.0 | 46.1 | 40.0 | 0.0 | ||
| Speed (RPM) | 898 | 887 | 861 | 841 | 811 | 770 | 649 | 0 | ||
| Line Amps | 6.80 | 6.80 | 7.20 | 7.80 | 9.00 | 10.60 | 13.60 | 0.00 |
Parts
| CYL OIL CAP 10MFD/370V | |
| 35EP3102A01SP | FR ENDPLATE, MACH |
| 35CB4500SP | TERMINAL BOX LID STAMPED |
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
