Description
Specs
| Catalog Number | CFSWDM3542-E |
|---|---|
| Enclosure | TENV |
| Frame | 56C |
| Frame Material | Stainless Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 1.300 A @ 460.0 V 2.600 A @ 208.0 V 2.600 A @ 230.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 84.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 1.3 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | H |
| Inverter Code | Inverter Ready |
| KVA Code | N |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Finish | UNPAINTED |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3522M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 12.78 IN |
| Power Factor | 70 |
| Product Family | WD All SS Encapsulated |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1760 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CFSWDM3542-E |
|---|---|
| SPEC. | 35E4735P564G1 |
| HP | .75 |
| VOLTS | 208-230/460 |
| AMP | 2.6/1.3 |
| RPM | 1760 |
| FRAME | 56C |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 84 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TENV |
Performance
| Line-Line Res. @ 25° C | 16 Ohms A Ph / 0 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 60° C |
| Temp. Rise @ S.F. Load | 69° C |
| Start Configuration | DOL |
| Break-Down Torque | 11.1 LB-FT |
| Pull-Up Torque | 5.62 LB-FT |
| Locked-Rotor Torque | 8.1 LB-FT |
| Starting Current | 11.1 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 9.0 | 32.0 | 49.0 | 62.0 | 69.0 | 76.0 | 81.0 | 69.0 | ||
| Efficiency | 0.0 | 71.7 | 81.0 | 84.4 | 85.4 | 85.2 | 84.9 | 84.2 | ||
| Speed (RPM) | 1,799 | 1,790 | 1,782 | 1,774 | 1,765 | 1,755 | 1,744 | 1,752 | ||
| Line Amps | 0.77 | 0.81 | 0.89 | 1.01 | 1.19 | 1.36 | 1.54 | 1.39 |
