Description
Specs
| Catalog Number | CFSWDM3539-E |
|---|---|
| Enclosure | TENV |
| Frame | 56C |
| Frame Material | Stainless Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | .900 A @ 460.0 V 1.800 A @ 230.0 V 1.850 A @ 208.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 77.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 0.9 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | H |
| Inverter Code | Inverter Ready |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Finish | UNPAINTED |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3522M |
| Mounting Arrangement | F1 |
| Number of Poles | 6 |
| Overall Length | 12.78 IN |
| Power Factor | 63 |
| Product Family | WD All SS Encapsulated |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1155 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CFSWDM3539-E |
|---|---|
| SPEC. | 35E4735N468G1 |
| HP | .5 |
| VOLTS | 208-230/460 |
| AMP | 1.85-1.8/.9 |
| RPM | 1155 |
| FRAME | 56C |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 77 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TENV |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 36.992 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 72° C |
| Temp. Rise @ S.F. Load | 86° C |
| Start Configuration | DOL |
| Break-Down Torque | 7.12 LB-FT |
| Pull-Up Torque | 4.69 LB-FT |
| Locked-Rotor Torque | 4.83 LB-FT |
| Starting Current | 4.93 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 11.0 | 24.0 | 40.0 | 54.0 | 63.0 | 70.0 | 74.0 | 67.0 | ||
| Efficiency | 0.0 | 55.5 | 71.7 | 76.6 | 77.3 | 76.5 | 74.3 | 76.8 | ||
| Speed (RPM) | 1,198 | 1,192 | 1,182 | 1,170 | 1,157 | 1,142 | 1,123 | 1,148 | ||
| Line Amps | 0.63 | 0.65 | 0.71 | 0.79 | 0.91 | 1.05 | 1.22 | 0.99 |
