Description
Specs
| Catalog Number | CEWDM3709T-5 |
|---|---|
| Enclosure | TEFC |
| Frame | 213TC |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 7.500 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | NEMA_PREMIUM UR NEMA PREMIUM CSA EEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 7.000 A @ 575.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 7.0 a |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | L |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 14 AWG |
| Motor Type | 3738M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 19.78 IN |
| Power Factor | 90 |
| Product Family | Wash Down |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.375 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3500 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CEWDM3709T-5 |
|---|---|
| SPEC. | 37H887Y767G1 |
| HP | 7.5 |
| VOLTS | 575 |
| AMP | 7 |
| RPM | 3500 |
| FRAME | 213TC |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 91 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6307 |
| ENCL | TEFC |
Performance
| Temp. Rise @ Rated Load | 37° C |
|---|---|
| Temp. Rise @ S.F. Load | 46° C |
| Start Configuration | DOL |
| Break-Down Torque | 54 LB-FT |
| Pull-Up Torque | 24 LB-FT |
| Locked-Rotor Torque | 32 LB-FT |
| Starting Current | 69 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 12.0 | 62.0 | 81.0 | 86.0 | 89.0 | 90.0 | 86.0 | 90.0 | ||
| Efficiency | 0.0 | 85.1 | 90.0 | 91.2 | 91.1 | 90.5 | 89.4 | 90.7 | ||
| Speed (RPM) | 3,599 | 3,578 | 3,557 | 3,538 | 3,516 | 3,493 | 3,463 | 3,502 | ||
| Line Amps | 2.00 | 2.70 | 3.90 | 5.40 | 6.90 | 8.60 | 10.80 | 7.92 |
Parts
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
|---|---|
| HW4600B31SP | V-RING SLINGER 1.438 X 1.758 X .24 VITON |
| 36FN3000C02SP | EXFN, PLASTIC, 5.25 OD, 1.175 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
