Description
Specs
| Catalog Number | CESSWDM3558-H |
|---|---|
| Enclosure | TEFC |
| Frame | 56HC |
| Frame Material | Stainless Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 5.600 A @ 208.0 V 5.300 A @ 230.0 V 2.650 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 86.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 2.7 a |
| Heater Indicator | No Heater |
| Insulation Class | H |
| Inverter Code | Inverter Ready |
| IP Rating | IP56 |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Finish | UNPAINTED |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3528M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 13.03 IN |
| Power Factor | 81 |
| Product Family | Wash Down All Stainless Steel |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1765 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CESSWDM3558-H |
|---|---|
| SPEC. | 35-0000-1374 |
| HP | 2 |
| VOLTS | 230/460 |
| AMP | 5.3/2.65 |
| RPM | 1765 |
| FRAME | 56HC |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 86.5 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| DE | 6205 |
| ENCL | TEFC |
Performance
| Line-Line Res. @ 25° C | 9.9 Ohms A Ph / 0 Ohms B Ph |
|---|---|
| Temp. Rise @ Rated Load | 80° C |
| Temp. Rise @ S.F. Load | 95° C |
| Start Configuration | DOL |
| Break-Down Torque | 21.8 LB-FT |
| Pull-Up Torque | 12.9 LB-FT |
| Locked-Rotor Torque | 15.6 LB-FT |
| Starting Current | 22.5 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 39.0 | 61.0 | 74.0 | 81.0 | 84.0 | 86.0 | 83.0 | ||
| Efficiency | 0.0 | 80.4 | 86.5 | 87.6 | 87.1 | 85.7 | 83.9 | 86.3 | ||
| Speed (RPM) | 1,799 | 1,791 | 1,783 | 1,773 | 1,764 | 1,754 | 1,741 | 1,758 | ||
| Line Amps | 1.40 | 1.50 | 1.78 | 2.18 | 2.67 | 3.26 | 3.86 | 3.02 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| 36GS3008SP | WHITE NEOPRENE KO BOX LID GASKET |
