Description
Specs
Catalog Number | CEM3710T-5 |
---|---|
Enclosure | TEFC |
Frame | 213TC |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 7.500 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 575.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 7.600 A @ 575.0 V |
Design Code | A |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 91.7 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 7.6 a |
Front Face Code | Standard |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Inverter Ready |
KVA Code | J |
Lifting Lugs | Standard Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 3 @ 14 AWG |
Motor Type | 3738M |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 19.76 IN |
Power Factor | 82 |
Product Family | General Purpose |
Pulley End Bearing Type | Ball |
Pulley Face Code | C-Face |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
RoHS Status | ROHS COMPLIANT |
Service Factor | 1.15 |
Shaft Diameter | 1.375 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 1770 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | CEM3710T-5 |
---|---|
SPEC. | 37G814R907G1 |
HP | 7.5 |
VOLTS | 575 |
AMP | 7.6 |
RPM | 1770 |
FRAME | 213TC |
SER.F. | 1.15 |
NEMA-NOM-EFF | 91.7 |
RATING | 40C AMB-CONT |
CC | 010A |
DE | 6307 |
ENCL | TEFC |
Performance
Line-Line Res. @ 25° C | 2.22 Ohms A Ph / 0 Ohms B Ph |
---|---|
Temp. Rise @ Rated Load | 63° C |
Temp. Rise @ S.F. Load | 77° C |
Start Configuration | DOL |
Break-Down Torque | 71 LB-FT |
Pull-Up Torque | 32.6 LB-FT |
Locked-Rotor Torque | 43 LB-FT |
Starting Current | 56.9 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 5.0 | 42.0 | 63.0 | 75.0 | 80.0 | 83.0 | 84.0 | 82.0 | ||
Efficiency | 0.0 | 87.1 | 91.7 | 91.9 | 92.1 | 91.0 | 89.9 | 91.4 | ||
Speed (RPM) | 1,799 | 1,793 | 1,786 | 1,778 | 1,770 | 1,760 | 1,750 | 1,764 | ||
Line Amps | 3.48 | 3.90 | 4.84 | 6.10 | 7.61 | 9.29 | 11.10 | 8.62 |
Parts
37GS1000SP | GASKET, CONDUIT BOX STD., .06 THICK LEXI |
---|---|
51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
07FH4007SP | PRIMED |
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |