Description
Specs
Catalog Number | CEM3708T-G |
---|---|
Enclosure | TEFC |
Frame | 215TC |
Frame Material | Iron |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 5.000 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 1200 RPM @ 60 HZ |
Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 7.100 A @ 460.0 V 14.200 A @ 230.0 V |
Design Code | B |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 89.5 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 7.1 a |
Heater Indicator | No Heater |
Insulation Class | H |
Inverter Code | Inverter Ready |
IP Rating | NONE |
KVA Code | J |
Lifting Lugs | Standard Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Termination | Flying Leads |
Motor Type | 0748M |
Mounting Arrangement | F1 |
Number of Poles | 6 |
Overall Length | 19.20 IN |
Power Factor | 74 |
Product Family | General Purpose |
Pulley Face Code | C-Face |
Rodent Screen | None |
Service Factor | 1.15 |
Shaft Diameter | 1.375 IN |
Shaft Ground Indicator | Shaft Grounding |
Shaft Rotation | Reversible |
Speed | 1160 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | CEM3708T-G |
---|---|
SPEC | 07-0000-0412 |
HP | 5 |
VOLTS | 230/460 |
AMPS | 14.2/7.1 |
RPM | 1160 |
FRAME | 215TC |
SF | 1.15 |
NEMA NOM. EFF | 89.5 |
RATING | 40C AMB-CONT |
CC | 010A |
ENCL | TEFC |
DE | 6307 |
Performance
Full Load Torque | 0 LB-FT |
---|---|
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 1.91 Ohms A Ph / 0 Ohms B Ph |
Temp. Rise @ Rated Load | 53° C |
Temp. Rise @ S.F. Load | 67° C |
Start Configuration | DOL |
Break-Down Torque | 68.1 LB-FT |
Pull-Up Torque | 40.7 LB-FT |
Locked-Rotor Torque | 48.9 LB-FT |
Starting Current | 45.7 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 5.0 | 39.0 | 58.0 | 69.0 | 74.0 | 76.0 | 76.0 | 75.0 | ||
Efficiency | 0.0 | 86.7 | 90.4 | 90.9 | 89.8 | 88.2 | 86.1 | 88.8 | ||
Speed (RPM) | 1,199 | 1,189 | 1,179 | 1,170 | 1,158 | 1,144 | 1,126 | 1,150 | ||
Line Amps | 3.19 | 3.53 | 4.38 | 5.57 | 7.08 | 8.71 | 10.70 | 8.06 |
Parts
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
---|---|
07FH4007SP | PRIMED |
37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
37EP1300A01SP | FACE MT ENDPLATE-ENCL-307 BRG-213TC-215T |
09CB3002SP | CB W/1.38 LEAD HOLE FOR 37, 39, 307 & 30 |
51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 |
09GS1013SP | GS FOR 09CB3501, 12CB1500 & 12CB1503 LID |
51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |