Description
Specs
| Catalog Number | CECP84106T-4 |
|---|---|
| Enclosure | TEFC |
| Frame | 256TC |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 20.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ |
| XP Class and Group | CLI GP A,B,C,D |
| XP Division | Division II |
| Agency Approvals | CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 1.5 |
| Current @ Voltage | 50.000 A @ 208.0 V 22.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Modification | 841 |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 22.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | IP56 |
| KVA Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 5400 rpm |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Ring Terminals |
| Motor Lead Quantity/Wire Size | 3 @ 12 AWG |
| Motor Type | 0954M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 25.28 IN |
| Power Factor | 91 |
| Product Family | Chem Process S/P 32-8 IEEE 841 |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3510 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3 |
Drawings
Nameplate
| STK.NO. | CECP84106T-4 |
|---|---|
| SPEC. | 09-0000-0981 |
| HP | 20 |
| RPM | 3510 |
| VOLT | 460 |
| AMP | 22 |
| RATING | 40C AMB-CONT |
| NEMA-NOM-EFF | 91 |
| G.MIN.EFF | 89.5 |
| TEMP CODE | T3 |
| TEMP = | 200 |
| CT HZ FROM | 1.5 |
Performance
| No-Load Current | 0 A |
|---|---|
| Line-Line Res. @ 25° C | 0.45009 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 68° C |
| Temp. Rise @ S.F. Load | 87° C |
| Start Configuration | DOL |
| Break-Down Torque | 101 LB-FT |
| Pull-Up Torque | 33.7 LB-FT |
| Locked-Rotor Torque | 43.9 LB-FT |
| Starting Current | 145 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 8.0 | 72.0 | 87.0 | 91.0 | 91.0 | 92.0 | 92.0 | 92.0 | ||
| Efficiency | 0.0 | 91.4 | 93.3 | 93.0 | 92.0 | 90.6 | 88.9 | 91.2 | ||
| Speed (RPM) | 3,599 | 3,580 | 3,560 | 3,538 | 3,514 | 3,487 | 3,454 | 3,498 | ||
| Line Amps | 4.81 | 7.42 | 11.80 | 16.70 | 22.40 | 28.40 | 34.70 | 26.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
