Description
Specs
| Catalog Number | CECP3587T-5 |
|---|---|
| Enclosure | TEFC |
| Frame | 145TC |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | CLI GP A,B,C,D |
| XP Division | Division II |
| Agency Approvals | CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 1.5 |
| Current @ Voltage | 2.300 A @ 575.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 88.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 2.3 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | L |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
| Motor Type | 0534M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 13.38 IN |
| Power Factor | 75 |
| Product Family | Chemical Processing (Not DC) |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1755 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T4 |
Drawings
Nameplate
| CAT.NO. | CECP3587T-5 |
|---|---|
| SPEC. | 05F007X086G2 |
| HP | 2 TE |
| VOLTS | 575 |
| AMP | 2.3 |
| RPM | 1755 |
| FRAME | 145TC |
| SER.F. | 1.15 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| NEMA-NOM-EFF | 88.5 |
| G.MIN.EFF | 88.5 |
| T. CODE | T4 |
| D.E. BRG. | 25BC02XP30X |
| O.D.E. BRG. | 25BC02XP30X |
| GREASE | POLYREX EM |
| BLANK | CECP3587T-5 |
| INV.TYPE | PWM |
| T= | 135 |
| C HP FR | 60 |
| CT HZ FROM | 1.5 |
| VT HZ FROM | -0 |
| HTR-VOLTS | N/A |
| HTR-WATTS | N/A |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 9.84 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 39° C |
| Temp. Rise @ S.F. Load | 46° C |
| Start Configuration | DOL |
| Break-Down Torque | 26 LB-FT |
| Pull-Up Torque | 14.9 LB-FT |
| Locked-Rotor Torque | 17.7 LB-FT |
| Starting Current | 20 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 6.0 | 33.0 | 54.0 | 67.0 | 75.0 | 80.0 | 83.0 | 78.0 | ||
| Efficiency | 0.0 | 80.4 | 86.9 | 88.7 | 88.7 | 88.0 | 87.1 | 88.3 | ||
| Speed (RPM) | 1,799 | 1,790 | 1,780 | 1,770 | 1,760 | 1,748 | 1,736 | 1,753 | ||
| Line Amps | 1.35 | 1.42 | 1.63 | 1.91 | 2.27 | 2.66 | 3.10 | 2.50 |
Parts
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X .75 |
|---|---|
| HW4600B32SP | V-RING SLINGER 1.000 X 1.540 X .24 VITON |
| HA1005A03SP | SLINGER, OD 1.750, ID .938, 205 BRG |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
