Description
Specs
| Catalog Number | CEBM3714T-D |
|---|---|
| Enclosure | TEFC |
| Frame | 215TC |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 10.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CE CSA CSA EEV UR WEEE |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Brake Torque | 35.0 lb-ft |
| Current @ Voltage | 25.400 A @ 208.0 V 24.000 A @ 230.0 V 12.000 A @ 460.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.7 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 12.0 a |
| Front Face Code | Fan Housing Cover For Brake |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | K |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 14 AWG |
| Motor Type | 3752M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 27.67 IN |
| Power Factor | 85 |
| Product Family | General Purpose |
| Product Type | D-SERIES BRAKE MOTORS |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.375 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1770 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | CEBM3714T-D |
|---|---|
| SPEC. | 37M907S518G1 |
| HP | 10/7.5KW |
| VOLTS | 230/460 |
| AMPS | 24/12 |
| R.P.M. (1/MIN) | 1770 |
| FRAME | 215TC |
| SER.F. | 1.15 |
| NOM.EFF. | 91.7 |
| P.F. | 85 |
| RATING | 40C AMB-CONT |
| DE | 6307 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.95644 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 66° C |
| Temp. Rise @ S.F. Load | 82° C |
| Start Configuration | DOL |
| Break-Down Torque | 110 LB-FT |
| Pull-Up Torque | 58.7 LB-FT |
| Locked-Rotor Torque | 68 LB-FT |
| Starting Current | 103 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 5.0 | 42.0 | 65.0 | 76.0 | 81.0 | 84.0 | 85.0 | 83.0 | ||
| Efficiency | 0.0 | 89.0 | 92.6 | 93.0 | 92.6 | 91.8 | 90.6 | 92.1 | ||
| Speed (RPM) | 1,799 | 1,793 | 1,786 | 1,779 | 1,771 | 1,763 | 1,754 | 1,766 | ||
| Line Amps | 5.52 | 6.22 | 7.82 | 9.98 | 12.50 | 15.20 | 18.20 | 14.10 |
Parts
| GASKET, CONDUIT BOX STD., .06 THICK LEXI | |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| 37FN3002A01SP | EXFN, PLASTIC, 9.00 OD, 1.155 ID |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
