Description
Specs
| Catalog Number | CDRXL05144 |
|---|---|
| Enclosure | XPFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | 1.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | CLI GP C,D |
| XP Division | Division I |
| Agency Approvals | CSA UL |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 12.000 A @ 115.0 V 6.000 A @ 230.0 V |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 68.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 6.0 a |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3532L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 16.03 IN |
| Power Factor | 77 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 35-0000-0282 |
|---|---|
| CAT.NO. | CDRXL05144 |
| HP | 1 |
| VOLTS | 115/230 |
| AMPS | 12/6 |
| RPM | 1725 |
| HERTZ | 60 |
| SER.F. | 1.00 |
| FRAME | 56C |
| RATING | 40C AMB-CONT |
| USABLE AT 208V | N/A |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.7552 Ohms A Ph / 1.883 Ohms B Ph |
| Temp. Rise @ Rated Load | 76° C |
| Start Configuration | DOL |
| Break-Down Torque | 6.6 LB-FT |
| Pull-Up Torque | 4.4 LB-FT |
| Locked-Rotor Torque | 9.1 LB-FT |
| Starting Current | 73 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 18.0 | 41.0 | 59.0 | 71.0 | 79.0 | 85.0 | 88.0 | 0.0 | ||
| Efficiency | 0.0 | 55.5 | 67.2 | 70.0 | 69.3 | 65.6 | 59.5 | 0.0 | ||
| Speed (RPM) | 1,798 | 1,783 | 1,769 | 1,753 | 1,734 | 1,706 | 1,663 | 0 | ||
| Line Amps | 6.97 | 7.27 | 8.26 | 9.79 | 11.80 | 14.70 | 18.70 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
